Hoover 39001649 Vacuum Cleaner Manual

The Hoover 39001649 is a powerful vacuum cleaner designed for efficient cleaning of various surfaces. It features a multi-cyclonic technology that provides strong suction and a HEPA filter that captures allergens and dust particles. The vacuum is lightweight, easy to maneuver, and comes with various attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, HEPA filter, lightweight design, various attachments including crevice tool and upholstery brush.

Feature	Description
Multi-cyclonic technology	Provides powerful suction and prevents loss of suction.
HEPA filter	Captures 99.97% of dust and allergens.
Lightweight design	Easy to carry and maneuver around the house.
Attachments	Includes crevice tool, dusting brush, and upholstery tool.
Easy-to-empty dust bin	Convenient for quick disposal of dirt and debris.

Installation

Unpack the vacuum cleaner and inspect for any damages. Attach the handle and any accessories as needed.

Attach the handle: Align and secure it to the main body.
Connect the hose: Insert the hose into the designated port.
Plug in the power cord: Ensure it is connected to a suitable outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Check the dust bin: Ensure it is empty and properly attached.
Adjust the height setting: Set according to the type of flooring.
Test the suction: Turn on the vacuum and check for proper operation.

CAUTION! Do not operate the vacuum without the filter in place.

Specifications

Model: Hoover 39001649.
Power: 12 amps.
Filtration: HEPA filter.
Weight: 12 lbs.
Cord Length: 25 feet.
Dust Capacity: 1.5 liters.
Attachments: Crevice tool, dusting brush, upholstery tool.

Controls and Settings

Access the power switch and suction control dial located on the handle. The vacuum features a height adjustment lever for different floor types.

Attachments: Easily switch between attachments using the quick-release button.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the accessory with the port.
Push until it clicks into place.
To remove, press the release button and pull out.

Tip: Use the appropriate attachment for the surface being cleaned.

Operating the Vacuum

To operate, plug in the vacuum and turn on the power switch. Adjust the suction as needed.

Start cleaning: Move the vacuum back and forth over the surface.
Empty the dust bin: When full, press the release button and dispose of contents.
Clean the filter: Rinse under water and let dry before reinserting.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and empty the dust bin frequently.

CAUTION! Unplug the vacuum before performing any maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power connection and outlet.
No suction	Clogged hose or full dust bin	Inspect and clear any clogs; empty the dust bin.
Filter needs cleaning	Reduced airflow	Remove and clean the filter as per instructions.
Strange noise	Foreign object in brush roll	Turn off and inspect the brush roll for obstructions.

Reset: If issues persist, refer to the troubleshooting section in the manual.

Service: For further assistance, contact Hoover customer service.