Hoover 39400261 Vacuum Cleaner Manual

The Hoover 39400261 is a powerful vacuum cleaner designed for efficient cleaning of carpets and hard floors. It features a lightweight design, multi-cyclonic technology, and a HEPA filter that captures 99.97% of dust and allergens. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, HEPA filter, lightweight design, various attachments for different surfaces.

Feature	Description
Multi-cyclonic technology	Provides powerful suction and prevents clogging
HEPA filter	Captures 99.97% of dust and allergens
Lightweight design	Easy to maneuver and carry
Attachments	Includes crevice tool, dusting brush, and upholstery nozzle
Bagless design	No need for replacement bags; easy to empty

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the main body.
Install the HEPA filter: Ensure the filter is properly seated in its compartment.
Connect attachments: Choose the appropriate attachment for your cleaning needs.
Plug into AC power.

WARNING! Ensure vacuum is off before connecting or disconnecting attachments.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the dust container: Ensure it is empty before use.
Adjust height settings: Set the appropriate height for your flooring type.
Test suction: Turn on the vacuum and check for proper suction.

CAUTION! Do not operate without the HEPA filter installed.

Specifications

Model: Hoover 39400261
Type: Bagless upright vacuum cleaner
Power: 12 amps
Filtration: HEPA filter
Weight: 12 lbs
Cord Length: 25 feet
Attachments: Crevice tool, dusting brush, upholstery nozzle
Warranty: 2 years limited warranty

Controls and Settings

Access controls on the handle: Power switch, height adjustment lever.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure vacuum is off before connecting accessories.

Choose the desired attachment.
Align and push the attachment into the connector until it clicks.
Test the connection by gently pulling on the attachment.

Tip: Use the crevice tool for tight spaces and the dusting brush for delicate surfaces.

Operating the Vacuum

To operate the vacuum, follow these steps:

Power on the vacuum using the switch on the handle.
Adjust the height setting based on the surface being cleaned.
Move the vacuum back and forth to clean the area.
Empty the dust container when full.

WARNING! Do not use on wet surfaces.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the HEPA filter every 6 months.
Empty the dust container after each use.
Check for clogs in hoses and attachments.
Inspect the brush roll for hair and debris.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For more information, visit the Hoover website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power connection and reset circuit breaker if necessary.
No suction	Clogged hose	Inspect and clear any blockages in the hose.
Filter needs cleaning	Indicator light on	Clean or replace the HEPA filter as needed.
Brush roll not spinning	Obstruction	Remove any debris blocking the brush roll.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact Hoover customer service.