Hoover BR71 BR20 Vacuum Cleaner manual

The Hoover BR71 BR20 is a powerful vacuum cleaner designed for efficient cleaning of various surfaces. It features a lightweight design, advanced filtration system, and multiple attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, advanced filtration, multiple attachments, easy-to-empty dust container.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
Advanced Filtration	HEPA filter captures allergens and dust
Multiple Attachments	Includes crevice tool, dusting brush, and upholstery nozzle
Easy-to-Empty Dust Container	Quickly dispose of collected dirt and debris
Powerful Suction	Efficiently cleans carpets and hard floors

Installation

Unpack and inspect contents. Assemble vacuum cleaner as per the instructions.

Attach the handle to the main body.
Connect the desired attachment to the hose.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; ensure the dust container is empty.

Check that the filter is installed correctly.
Choose the appropriate attachment for the surface you will clean.
Adjust the suction power if applicable.

CAUTION! Do not use on wet surfaces.

Specifications

Model: Hoover BR71 BR20.
Weight: 5.5 kg.
Power: 700W.
Filtration: HEPA filter.
Dust Capacity: 2 liters.
Attachments: Crevice tool, dusting brush, upholstery nozzle.
Power Cord Length: 6 meters.
Operating Voltage: 220-240V.

Controls and Settings

Power button located on the handle. Suction power adjustment dial on the body.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure vacuum is off before connecting or disconnecting accessories.

Align the attachment with the hose and push until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Use the crevice tool for tight spaces and the dusting brush for delicate surfaces.

Operating the Vacuum

Turn on the vacuum and begin cleaning by moving it back and forth over the surface.

Adjust the suction power as needed.
Use the appropriate attachment for the surface type.
Empty the dust container when full.

WARNING! Do not block the air intake while operating.

Maintenance and Care

Regularly check and clean the filter. Empty the dust container after each use.

CAUTION! Do not wash the filter; replace it as needed.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust container	Clear any blockages and empty the dust container.
Filter needs cleaning	Indicator light on	Remove and clean the filter as per instructions.
Strange noise	Foreign object in vacuum	Turn off and inspect for blockages.

Reset: Unplug for 10 seconds to reset the vacuum.

Service: For assistance, contact Hoover customer support.