Hoover CH86000 Vacuum Cleaner Manual

The Hoover CH86000 is a powerful and versatile vacuum cleaner designed for efficient cleaning of various surfaces. It features advanced cyclonic technology, a lightweight design, and multiple attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Cyclonic technology, lightweight design, multiple attachments, HEPA filtration, and easy-to-empty dust container.

Feature	Description
Cyclonic technology	Maintains strong suction power by separating dirt and debris.
HEPA filtration	Traps allergens and dust particles for cleaner air.
Lightweight design	Easy to maneuver and carry around the house.
Multiple attachments	Includes crevice tool, dusting brush, and upholstery nozzle.
Easy-to-empty dust container	Quickly dispose of collected dirt without mess.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle: Align the handle with the body and secure it.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into a power outlet: Ensure the power switch is off before plugging in.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dust container: Ensure it is empty and properly attached.
Adjust the height setting: Set the brush height according to the floor type.
Test the suction power: Turn on the vacuum and adjust the suction as needed.

CAUTION! Do not operate the vacuum without the dust container in place.

Specifications

Model: Hoover CH86000.
Type: Upright vacuum cleaner.
Filtration: HEPA filter.
Power: 120V AC, 60Hz.
Weight: 12 lbs.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery nozzle.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle: Power switch, suction control, and height adjustment.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Attach the desired accessory: Align and push until it clicks into place.
Remove accessories: Press the release button and pull off the accessory.

Tip: Store accessories in a designated area for easy access.

Operating the Vacuum

For optimal performance, follow these steps:

Power on the vacuum: Press the power switch to start.
Adjust suction: Use the suction control dial based on the surface.
Clean: Move the vacuum back and forth slowly for effective cleaning.
Power off: Turn off the vacuum when finished.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty the dust container after each use.
Clean the filters regularly; replace as needed.
Check for blockages in the hose and brush roll.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust container	Clear blockages and empty the container.
Brush roll not spinning	Height setting too low	Adjust height setting for the surface.
Strange noises	Foreign object in brush roll	Inspect and remove any obstructions.

Reset: If issues persist, consult the manual or contact support.

Service: 1-800-944-9200; www.hoover.com