Hoover DIVA Series Vacuum Cleaner Manual

The Hoover DIVA Series Vacuum Cleaner is designed for efficient cleaning with powerful suction and versatile features. It includes a range of attachments for various surfaces, a lightweight design for easy maneuverability, and advanced filtration technology to capture dust and allergens. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Powerful motor, HEPA filtration, multiple attachments, lightweight design, easy-to-empty dust container.

Feature	Description
Powerful Motor	Delivers strong suction for deep cleaning.
HEPA Filtration	Captures 99.97% of dust and allergens.
Multiple Attachments	Includes crevice tool, upholstery brush, and dusting brush.
Lightweight Design	Easy to carry and maneuver around the house.
Easy-to-Empty Dust Container	Simple release mechanism for quick disposal.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle: Align and secure the handle to the main body.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into AC power: Ensure the power switch is off before plugging in.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dust container: Ensure it is empty and properly attached.
Attach desired accessory: Choose the appropriate tool for your cleaning task.
Adjust height settings: Set the brush height according to the floor type.

CAUTION! Do not operate the vacuum without a dust container or filter in place.

Specifications

Model: Hoover DIVA Series.
Power: 12 Amps.
Filtration: HEPA filter.
Weight: 10 lbs.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery brush, dusting brush.
Dust Container Capacity: 1.5 liters.
Operating Temperature: Standard room temperature.

Controls and Settings

Power switch located on the handle. Height adjustment dial for different floor types. Dust container release button for easy emptying.

Attachments: Easily switch between attachments using the quick-release feature.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Choose the appropriate accessory for your cleaning task.
Align the accessory with the hose or wand and push until it clicks into place.
To remove, press the release button and pull the accessory off.

Tip: Store accessories in a designated area for easy access.

Operating the Vacuum

To start cleaning, press the power switch and begin vacuuming.

Adjust the height setting if necessary.
Move the vacuum back and forth across the surface to be cleaned.
Empty the dust container when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regularly check and clean the filters and dust container.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

Complies with FCC regulations for household appliances. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check power connection and cord for damage.
No suction	Clogged hose or full dust container	Clear any clogs and empty the dust container.
Brush not spinning	Height setting too low	Adjust height setting for the surface type.
Excessive noise	Blockage or worn belt	Check for blockages and replace the belt if necessary.

Reset: Unplug for 10 seconds and plug back in.

Service: For assistance, contact Hoover customer service.