Hoover EmPower C1660 Vacuum Cleaner Manual

The Hoover EmPower C1660 is a powerful and efficient vacuum cleaner designed for both home and commercial use. It features a lightweight design, strong suction power, and a variety of attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, powerful motor, HEPA filtration, various cleaning attachments, and easy-to-empty dust container.

Feature	Description
Lightweight Design	Easy to maneuver and carry around the house or office.
Powerful Motor	Provides strong suction for effective cleaning.
HEPA Filtration	Traps allergens and dust particles for cleaner air.
Various Attachments	Includes crevice tool, dusting brush, and upholstery nozzle.
Easy-to-Empty Dust Container	Simplifies the process of disposing of collected dirt.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle to the main body of the vacuum.
Connect the desired cleaning attachment.
Plug the vacuum into a power outlet.

WARNING! Ensure the vacuum is unplugged when attaching or detaching accessories.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and settings.

Check the dust container: Ensure it is empty and properly attached.
Select the appropriate attachment for your cleaning task.
Adjust the suction power if applicable.

CAUTION! Do not operate the vacuum without the dust container in place.

Specifications

Model: Hoover EmPower C1660.
Power: 12 Amps.
Filtration: HEPA filter.
Weight: 8 lbs.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery nozzle.
Dust Container Capacity: 1.5 liters.
Operating Voltage: 120V AC.

Controls and Settings

Access the power switch and suction control on the handle. Use the foot pedal to release the dust container.

Attachments: Easily switch between attachments using the quick-release button.

Connecting Accessories

Ensure the vacuum is unplugged before connecting or disconnecting accessories.

Align the attachment with the connector on the vacuum.
Push firmly until you hear a click.
To remove, press the release button and pull the attachment away.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

To start cleaning, plug in the vacuum and turn it on using the power switch.

Adjust the suction power based on the surface being cleaned.
Move the vacuum back and forth to pick up dirt and debris.
Empty the dust container when full.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regularly check and clean the HEPA filter to maintain suction power.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check the power outlet and cord for damage.
No suction	Clogged filter/container	Empty the dust container and clean the filter.
Strange noise	Foreign object in brush	Turn off and check for blockages in the brush.
Overheating	Blocked airflow	Turn off and allow to cool; check for clogs.

Reset: If issues persist, refer to the customer service contact.