Hoover F5520 Vacuum Cleaner Manual

The Hoover F5520 is a powerful vacuum cleaner designed for efficient cleaning of carpets and hard floors. It features a multi-cyclonic suction system, a HEPA filter for allergen reduction, and various attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, HEPA filter, various cleaning attachments, and adjustable height settings.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and reduces clogging.
HEPA Filter	Traps 99.97% of dust and allergens.
Adjustable Height	For optimal cleaning on different floor types.
Attachments	Includes crevice tool, dusting brush, and upholstery tool.
Large Capacity Bag	Reduces the frequency of bag changes.

Installation

Unpack and inspect contents. Assemble the vacuum according to the instructions.

Attach the handle to the main body.
Insert the hose into the designated port.
Connect the desired cleaning attachment.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Adjust the height setting based on your floor type.
Check the dust bag and filter before first use.
Test the suction power with the hose and attachments.

CAUTION! Do not operate without a dust bag or filter.

Specifications

Model: Hoover F5520.
Power: 12 Amps.
Filtration: HEPA filter.
Weight: 15 lbs.
Capacity: 2.5 liters.
Cord Length: 25 feet.
Warranty: 2 years limited.

Controls and Settings

Access controls on the handle: Power switch, height adjustment, and attachment release button.

Remote: Not applicable for this model.

Adjust suction power using the dial located on the body of the vacuum.

Connecting Accessories

Ensure the vacuum is off before connecting accessories.

Match the attachment to the hose.
Push firmly until it clicks into place.
Test the connection by gently pulling on the attachment.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

Follow these steps for effective cleaning:

Turn on the vacuum using the power switch.
Adjust the height setting as needed.
Guide the vacuum slowly over the surface to ensure thorough cleaning.
Empty the dust bag when full.

WARNING! Do not use on wet surfaces.

Maintenance and Care

Regular maintenance will extend the life of your vacuum.

Clean the HEPA filter every 6 months.
Replace the dust bag when full.
Check for blockages in the hose and attachments.
Wipe the exterior with a damp cloth.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power source	Check if plugged in; inspect power cord.
No suction	Clogged hose	Check for blockages; clean filters.
Overheating	Full dust bag	Empty the dust bag; allow to cool.
Strange noise	Foreign object	Inspect for objects in the brush or hose.

Reset: Unplug for 10 seconds to reset.

Service: 1-800-944-9200; www.hoover.com