Hoover F5914 Vacuum Cleaner Manual

The Hoover F5914 is a powerful and versatile vacuum cleaner designed for deep cleaning carpets and hard floors. It features a multi-cyclonic suction system, a HEPA filter for allergen reduction, and a variety of attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, HEPA filter, various cleaning attachments, and adjustable height settings.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and reduces clogging.
HEPA Filter	Traps 99.97% of dust and allergens.
Adjustable Height	For optimal cleaning on different floor types.
Crevice Tool	For cleaning tight spaces and corners.
Upholstery Tool	For cleaning furniture and drapes.
Dusting Brush	For delicate surfaces and dusting.

Installation

Unpack the vacuum and inspect all components. Assemble the handle and attach any necessary accessories.

Attach the handle to the main body until it clicks into place.
Connect the hose to the vacuum body.
Attach the desired cleaning tool to the hose.
Plug into a power outlet.

WARNING! Ensure vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and settings.

Adjust the height setting based on your floor type.
Check the dust container and filter for proper installation.
Test the vacuum on a small area to ensure functionality.

CAUTION! Do not operate the vacuum without the dust container or filter in place.

Specifications

Model: Hoover F5914.
Type: Upright vacuum cleaner.
Filtration: HEPA filter.
Power: 12 amps.
Weight: 15 lbs.
Cord Length: 25 feet.
Cleaning Path Width: 13 inches.
Accessories: Crevice tool, upholstery tool, dusting brush.

Controls and Settings

Access controls on the handle for power, height adjustment, and tool selection.

Power Button: Located on the handle for easy access.

Height Adjustment: Rotate the dial to select the appropriate height for your flooring.

Connecting Accessories

Attach accessories by firmly pushing them onto the hose or vacuum body.

Ensure the vacuum is off before changing attachments.
Align the attachment with the hose or body and push until it clicks.
Test the attachment by turning on the vacuum.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

To operate, simply plug in, adjust settings, and turn on the vacuum.

Plug the vacuum into a power outlet.
Adjust the height setting based on your flooring.
Press the power button to start vacuuming.
Use the hose and attachments for above-floor cleaning.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Empty the dust container after each use.
Check and clean the HEPA filter regularly.
Inspect the brush roll for hair or debris.
Store in a dry place when not in use.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust container	Inspect and clear any blockages; empty dust container.
Brush roll not spinning	Height setting too low	Adjust height setting for optimal performance.
Filter needs replacement	Loss of suction	Check filter and replace if necessary.

Reset: Unplug for 10 seconds and plug back in to reset.

Service: For assistance, call 1-800-944-9200 or visit www.hoover.com.