Hoover FloorMATE H2801-0RM Vacuum Cleaner Manual

The Hoover FloorMATE H2801-0RM is a versatile vacuum cleaner designed for cleaning hard floors and carpets. It features a dual-tank system that separates clean and dirty water, a powerful motor for effective suction, and a variety of attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-tank system, powerful suction motor, multiple attachments, lightweight design, easy-to-use controls.

Feature	Description
Dual-tank system	Separates clean and dirty water for effective cleaning
Powerful motor	Provides strong suction for deep cleaning
Multiple attachments	Includes brushes and nozzles for various surfaces
Lightweight design	Easy to maneuver and carry
Easy-to-use controls	Simple operation for all users

Installation

Unpack the vacuum cleaner and inspect contents. Assemble according to the instructions provided.

Attach the handle to the main body.
Ensure the tanks are properly secured.
Plug into AC power.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the vacuum cleaner; follow the setup instructions.

Fill the clean water tank with water and cleaning solution.
Check that the dirty water tank is empty and properly attached.
Test the vacuum on a small area to ensure functionality.

CAUTION! Ensure the vacuum is on a stable surface during setup.

Specifications

Model: Hoover FloorMATE H2801-0RM.
Power: 120V AC, 60Hz.
Weight: 12 lbs.
Tank Capacity: 1.5 gallons for clean water, 1 gallon for dirty water.
Cleaning Path Width: 12 inches.
Attachments: Crevice tool, upholstery brush, hard floor brush.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle for power, mode selection, and water release.

Settings: Choose between hard floor and carpet cleaning modes.

Connecting Accessories

Attach accessories for specific cleaning tasks.

Turn off the vacuum before changing attachments.
Match the attachment to the designated port.

Tip: Use the appropriate attachment for optimal cleaning results.

Using the Vacuum Cleaner

Follow these steps for effective cleaning.

Power on the vacuum and select the cleaning mode.
Move the vacuum slowly across the surface for best results.
Empty the dirty water tank as needed.

WARNING! Do not use on wet surfaces unless specified.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Unplug before cleaning or servicing the vacuum.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not turning on	Power connection	Check power cord and outlet.
No suction	Clogged hose	Inspect and clear any blockages.
Water leaking	Tank not secured	Ensure tanks are properly attached.
Brush not spinning	Blocked brush	Remove debris and clean brush.

Service: For further assistance, contact customer service.