Hoover FloorMATE Hard Floor Cleaner Vacuum Cleaner Manual

The Hoover FloorMATE is a versatile hard floor cleaner designed to effectively clean sealed hard floors, including tile, hardwood, and laminate. It features dual-tank technology to keep clean and dirty water separate, a powerful suction for quick drying, and a variety of cleaning modes to tackle different surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Cleaner 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual-tank system, SpinScrub brushes, Clean Boost control, and a lightweight design for easy maneuverability.

Feature	Description
Dual-tank technology	Separates clean and dirty water for effective cleaning
SpinScrub brushes	Gently scrubs hard floors for a deep clean
Clean Boost control	Provides extra cleaning solution for tough stains
Lightweight design	Easy to carry and maneuver around the home
Easy to empty	Convenient tank design for quick disposal of dirty water

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the main unit until it clicks into place.
Fill the clean water tank with water and cleaning solution as per instructions.
Ensure the dirty water tank is properly secured.
Plug into AC power and turn on the unit.

WARNING! Ensure the unit is unplugged when filling tanks to avoid spills.

First-Time Setup

Power on the cleaner; follow on-screen prompts if available.

Fill the clean water tank with the recommended solution.
Check that the dirty water tank is empty and properly attached.
Adjust the handle to a comfortable position for use.

CAUTION! Ensure the cleaner is on a stable surface during setup.

Specifications

Model: Hoover FloorMATE
Weight: 13 lbs.
Power: 120V AC
Tank Capacity: 1.5 liters for clean water
Cleaning Path Width: 12 inches
Brush Speed: 360 RPM
Warranty: 2 years limited

Controls and Settings

Access controls on the handle: Power button, Clean Boost button, and mode selector.

Settings: Adjust cleaning mode based on floor type for optimal results.

Connecting Devices

No external devices are required for operation. Ensure the cleaner is plugged into a power source.

Using the Cleaner

Follow these steps for effective cleaning:

Power on the unit and select the desired cleaning mode.
Move the cleaner slowly across the floor for optimal results.
Use the Clean Boost feature for tough stains.
Empty the dirty water tank as needed during cleaning.

WARNING! Do not use on unsealed floors.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the brushes after each use.
Empty and rinse the dirty water tank regularly.
Check for clogs in the suction path.

Care & Cleaning

Unplug before cleaning. Use a damp cloth to wipe the exterior; do not immerse in water.

CAUTION! Avoid using harsh chemicals; they may damage the unit.

Regulatory Information

This product complies with FCC regulations for safety and performance. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No suction	Clogged hose	Check and clear any blockages in the hose.
Water leaking	Improperly secured tank	Ensure the clean and dirty water tanks are properly attached.
Brushes not spinning	Blocked brushes	Remove and clean brushes to ensure they spin freely.
Power issues	Not plugged in	Check power connection and ensure the unit is plugged in.

Reset: If issues persist, refer to the manual for reset instructions.

Service: For assistance, contact Hoover customer service.