Hoover FloorMate SpinScrub 800 Vacuum Cleaner manual

The Hoover FloorMate SpinScrub 800 is a versatile vacuum cleaner designed for cleaning hard floors and area rugs. It features SpinScrub technology for effective scrubbing, a dual-tank system for clean and dirty water separation, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: SpinScrub brushes, dual-tank system, lightweight design, easy-to-use controls.

Feature	Description
SpinScrub Technology	Multi-directional brushes for effective cleaning
Dual-Tank System	Separates clean and dirty water for efficient cleaning
Lightweight Design	Easy to carry and maneuver
Easy-to-Use Controls	Simple operation for all users
Washable Filters	Reusable filters for cost-effective maintenance

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the base.
Fill the clean water tank: Use the provided measuring cup for accurate filling.
Plug into AC power: Ensure the outlet is functional.

WARNING! Ensure the vacuum is unplugged when assembling.

First-Time Setup

Power on the vacuum; follow the setup instructions.

Fill the clean water tank with solution: Use Hoover-approved cleaning solution.
Check the dirty water tank: Ensure it is empty before use.
Test the vacuum: Turn on and check for proper suction.

CAUTION! Do not overfill the tanks; follow the guidelines.

Specifications

Model: Hoover FloorMate SpinScrub 800.
Weight: 13 lbs.
Power: 120V AC, 60Hz.
Tank Capacity: 1.5 gallons for clean water.
Brush Speed: 600 RPM.
Cord Length: 20 feet.
Cleaning Path Width: 12 inches.

Controls and Settings

Access controls on the handle: Power switch, solution trigger, and mode selector.

Mode Selector: Choose between hard floor and area rug settings.

Adjustable suction settings for different surfaces.

Connecting Devices

No external devices are required for operation. Ensure the vacuum is plugged into a power outlet.

Using the Vacuum Cleaner

For optimal results, follow these steps:

Turn on the vacuum and select the desired mode.
Press the solution trigger while moving the vacuum forward.
Release the trigger while moving backward to suction up the solution.
Empty the dirty water tank as needed.

WARNING! Do not use on wet surfaces without proper cleaning solution.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filters regularly: Rinse under running water and let dry.
Empty the dirty water tank after each use.
Check for blockages in the hose and brushes.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No suction	Clogged hose	Check and clear any blockages.
Water leaking	Improperly sealed tank	Ensure the tank is securely attached.
Brushes not spinning	Motor issue	Contact customer service for assistance.
Vacuum not turning on	Power supply issue	Check the outlet and power cord.

Reset: Unplug for 10 seconds and plug back in.

Service: 1-800-944-9200; www.hoover.com