Hoover HE730ALG Vacuum Cleaner Manual

The Hoover HE730ALG is a powerful and efficient vacuum cleaner designed for both carpets and hard floors. It features advanced multi-cyclonic technology for superior suction, a HEPA filter to capture allergens, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, HEPA filter, adjustable height settings, and a variety of attachments for different cleaning tasks.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and prevents clogging.
HEPA Filter	Captures 99.97% of dust and allergens.
Lightweight Design	Easy to carry and maneuver around the house.
Adjustable Height	For optimal cleaning on different floor types.
Attachments	Includes crevice tool, dusting brush, and upholstery tool.

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the vacuum body.
Connect the hose securely.
Plug into a power outlet.

WARNING! Ensure vacuum is off before connecting or disconnecting accessories.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Adjust height settings according to your floor type.
Check the dust container and filter are properly installed.
Test the vacuum on a small area to ensure functionality.

CAUTION! Do not operate without the filter in place.

Specifications

Model: Hoover HE730ALG.
Type: Upright vacuum cleaner.
Power: 12 Amps.
Filtration: HEPA filter.
Weight: 12 lbs.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle for power, height adjustment, and accessory selection.

Power: On/Off switch located on the handle.

Height Adjustment: Dial for adjusting the brush height based on floor type.

Connecting Accessories

Attach accessories by firmly pushing them onto the hose or wand.

Ensure vacuum is off before changing accessories.
Match the accessory to the intended cleaning task.

Tip: Use the crevice tool for tight spaces and the dusting brush for delicate surfaces.

Using the Vacuum Cleaner

For optimal performance, follow these steps:

Turn on the vacuum and select the appropriate height setting.
Begin cleaning by moving the vacuum forward and backward.
Empty the dust container when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean or replace the HEPA filter every 6 months.
Empty the dust container after each use.
Check for blockages in the hose and brush roll.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust container	Clear any blockages and empty the container.
Filter needs cleaning	Reduced airflow	Clean or replace the HEPA filter.
Brush roll not spinning	Height setting too low	Adjust height setting for carpet type.

Reset: Unplug for 10 seconds and plug back in to reset.

Service: For assistance, contact Hoover customer service.