Hoover HG870HU 011 Vacuum Cleaner Manual

The Hoover HG870HU 011 is a powerful vacuum cleaner designed for efficient cleaning of various surfaces. It features a lightweight design, advanced filtration system, and multiple attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, HEPA filtration, multiple attachments, easy-to-empty dust container.

Feature	Description
HEPA Filtration	Traps allergens and dust for cleaner air
Lightweight Design	Easy to carry and maneuver
Multiple Attachments	Includes crevice tool, upholstery brush, and dusting brush
Easy-to-Empty Dust Container	Quickly dispose of dirt and debris
Powerful Suction	Efficient cleaning on carpets and hard floors

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle: Align and secure the handle to the main body.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into AC power: Ensure the power switch is off before plugging in.

WARNING! Always check for damage before use. Do not operate without proper assembly.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Adjust suction power: Use the dial to set the desired suction level.
Select attachment: Choose the appropriate attachment for the surface being cleaned.
Begin cleaning: Move the vacuum slowly for optimal dirt pickup.

CAUTION! Ensure the vacuum is on a stable surface during operation.

Specifications

Model: Hoover HG870HU 011
Power: 1200W
Filtration: HEPA filter
Weight: 5.5 kg
Cord Length: 6 meters
Dust Capacity: 2 liters
Noise Level: 75 dB

Controls and Settings

Access controls on the main body: Power switch, suction control dial, and attachment release button.

Remote: Not applicable for this model.

Adjust settings for optimal performance based on the surface type.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the attachment with the connector.
Push firmly until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Use the appropriate attachment for different surfaces for best results.

Operating the Vacuum

Follow these steps for effective cleaning:

Turn on the vacuum using the power switch.
Adjust the suction power as needed.
Move the vacuum slowly across the surface for thorough cleaning.
Empty the dust container when full.

WARNING! Do not block the air intake during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter regularly: Rinse under water and let dry completely before reinserting.
Empty the dust container after each use.
Check for blockages in the hose and attachments.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.hoover.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power connection and switch.
No suction	Clogged filter/container	Empty dust container and clean filter.
Excessive noise	Blockage or damaged parts	Check for blockages and inspect for damage.
Attachments not fitting	Incorrect alignment	Ensure proper alignment and push firmly.

Reset: If issues persist, refer to the manual for reset instructions.

Service: Contact customer service for further assistance.